Salice_SILENTIAPLUS_eng -en-

ENGLISH

2

Catalogue index Accessories page 69 Silentia+ Series 100 page 9 Silentia+ Series 200 for thicker doors page 19 Silentia+ For metal profiles page 51 Silentia+ Series 700 page 37 Silentia+ Series 800 page 57 Silentia+ Series 900 page 63 Silentia+ Series 300 page 31 3

4

The state of the soft-close art. Silentia+ allows a perfect and constant closing of the door in any condition, use and application. The innovative soft-close technology guarantees excellent performances to the complete range of hinges. Silentia+ includes numerous technological elements in the required spaces and maintains the aesthetics of the hinges of the first generation. 5

Second generation Integrated soft-close technology with two silicone oil dampers. The two integrated dampers guarantee an exceptional regularity of the decelerating strength providing a perfect closing to any kind of door and condition. 6

30° 10° + - Silentia+ is also equipped with the innovative switch to delay the decelerating action. The activation of this switch allows, even to special doors, to obtain the ideal decelerating strength. Ever-optimal soft-close action 7

8

• Series 100 9

20.5 37 66 • Series 100 Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Bright nickel plated steel cup and arm. Dimensions of the Ø 35 mm cup. Hinges for doors of small weight and thickness. Constant “L” value of 1.3 mm (it does not change during side adjustment). Approx. number of hinges required according to the door dimension and weight. Width of the door Weight of the door (N) Height of the door Adjustments Compensated side adjustment from -1.5 mm to +4.5 mm. Height adjustment ±2 mm. Depth adjustment with Series 200 mounting plates +2.8 mm. Depth adjustment with Domi snap-on mounting plates from -0.5 mm to +2.8 mm. Anti-sliding safety stop. Mounting plates Symmetrical and asymmetrical bright nickel plated steel or die-cast Series 200 mounting plates. Snap-on assembly on Domi mounting plates. Positioning with pre-determined stop on traditional Series 200 mounting plates. N.B. : Use POZIDRIVE No. 2 screwdrivers for all screws. Technical features 10

ø35 12 Logica 105° opening and complementary hinges Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: C1_6AE9. Fill this position with the chosen letter or number. Wood screw Dowel Rapido Drillings and fixings 11

T= 15 16 17 18 19 20 K=3 A= 1.0 1.0 1.2 1.4 1.6 1.9 K=4 A= 0.9 1.0 1.2 1.3 1.5 1.8 K=5 A= 0.9 1.0 1.1 1.2 1.5 1.8 K=6 A= 0.9 1.0 1.1 1.2 1.4 1.7 T= 15 16 17 18 19 20 K=3 L= 0.0 0.0 0.0 0.0 0.1 0.3 K=4 L= 0.4 0.6 0.7 0.9 1.1 1.2 K=5 L= 1.0 1.0 1.2 1.8 2.0 2.0 K=6 L= 1.6 1.8 2.0 2.1 2.3 2.5 C = 20.5 + K + A • Series 100 • 105° opening Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Hinges for doors of small weight and thickness. 12 mm deep cup. 105° opening. Possible drilling distance on the door (K): from 3 to 6 mm. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. Space needed to open the door Projection of the door Projection of the door from the cabinet side at the max. opening. The figures are based on a straight arm hinge, H=0 mm thickness of mounting plate and K value = 3 mm. “C” value With this formula you can obtain the max. thickness of the moulded door that can be opened without touching adjacent carcase sides, doors or walls, whilst bearing in mind the above L•K•T values. The above values are calculated on the assumption that the doors have square edges. They are reduced if the doors have radiussed edges. 12

H = 15 + K - (D) H = 6 + K - (D) H = 10 + K - (D) C1_6AE9 C1_6GE9 C1_6DE9 C1_6PE9 H = -2 + K + A ø35 12 Use these formulas to determine the type of hinge arm, the drilling distance “K” and the height of the mounting plate “H” which is necessary to solve each application problem. Use the tables “Drillings and fixings” at page 11 to complete the code number of the desired hinge. Packing • Boxes 300 pcs. • Pallets 7.200 pcs. Logoica Packing • Boxes 150 pcs. • Pallets 3.600 pcs. Arm 0 Arm 9 Arm 5 Arm 17 13

C1_6ZE9 C1_6EE9 C1_6UE9 ø35 12 • Series 100 • Complementary hinges Technical Information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. For wooden doors with positive angled assembly. Hinges for doors of small weight and thickness. 12 mm deep cup. 105° opening. Possible drilling distance on the door (K): from 3 to 6 mm. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. The solution of assembly problems where doors are mounted at a positive angle requires the verification of drilling distances by a practical trial. Please do not hesitate to consult our technical support department for assistance. Use the tables “Drillings and fixings” at page 11 to complete the code number of the desired hinge. Packing • Boxes 150 pcs. • Pallets 3.600 pcs. Arm 15° Arm 24° Arm 30° 14

C1_6KE9 C1_6VE9 C1_6ME9AC C1_6ME9 C1_6TE9 H=3 K=4 Arm 30° Arm 45° Arm 37° Arm 45° Arm 45° 15

H = 0 H = 3 H = 6 C1_6NE9AC * A=1 K=3 ø35 12 Heights of mounting plates for every assembly. Use the tables “Drillings and fixings” at page 11 to complete the code number of the desired hinge. Packing • Boxes 150 pcs. • Pallets 3.600 pcs. Technical Information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Crampon hinges. For cabinet sides with 37x32 standard drilling. Hinges for doors of small weight and thickness. 12 mm deep cup. 105° opening. Possible drilling distance on the door (K): from 3 to 6 mm. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. E min: •61 mm for Series 200 mounting plates. •70 mm for Domi snap-on mounting plates. •74 mm for Domi snap-on mounting plates with back cam. 16

C1_6NE9 * A=1 K=3 H = 0 H = 9 H = 12 ø35 12 Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Crampon hinges. For smaller spaces with 15x32 mm drilling. Hinges for min. 18 mm thick doors. 12 mm deep cup. 94° opening. Possible drilling distance on the door (K): from 3 to 9 mm. Compatible with all traditional Series 200 mounting plates, 28x32 mm drilling. NOT COMPATIBLE with Domi snap-on mounting plates. Use the tables “Drillings and fixings” at page 11 to complete the code number of the desired hinge. Packing • Boxes 150 pcs. • Pallets 3.600 pcs. Heights of mounting plates for every assembly. 17

18

• Series 200 for thicker doors 19

20.5 37 66 • Series 200 for thicker doors Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Bright nickel plated steel cup and arm. Dimensions of the Ø 35 mm cup. Constant “L” value of 1.3 mm (it does not change during side adjustment). Approx. number of hinges required according to the door dimension and weight. Width of the door Weight of the door (N) Height of the door Adjustments Compensating side adjustment from -1.5 mm to +4.5 mm. Height adjustment ±2 mm. Depth adjustment with Series 200 mounting plates +2.8 mm. Depth adjustment with Domi snap-on mounting plates from -0.5 mm to +2.8 mm. Anti-sliding safety stop. Mounting plates Symmetrical and asymmetrical bright nickel plated steel or die-cast Series 200 mounting plates. Snap-on assembly on Domi mounting plates. Positioning with pre-determined stop on traditional Series 200 mounting plates. N.B. : Use POZIDRIVE No. 2 screwdrivers for all screws. Technical features 20

ø35 15.5 ø35 13.5 Wood screw Rapido Dowel 94° opening and complementary hinges Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: C2_BAE9. Fill this position with the chosen letter or number. 155° opening Logica Drillings and fixings 21

C = 23 + K + A T= 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 K=3 A= 0.1 0.2 0.3 0.4 0.5 0.7 0.8 1.0 1.6 2.6 3.5 4.5 5.4 6.4 7.4 8.3 9.3 K=4 A= 0.1 0.2 0.3 0.4 0.5 0.7 0.8 1.0 1.2 1.9 2.8 3.8 4.7 5.7 6.6 7.6 8.6 K=5 A= 0.1 0.2 0.3 0.4 0.5 0.7 0.8 1.0 1.2 1.4 2.2 3.1 4.1 5.0 5.9 6.9 7.8 K=6 A= 0.1 0.2 0.3 0.4 0.5 0.6 0.8 1.0 1.2 1.4 1.7 2.6 3.5 4.4 5.3 6.2 7.2 K=7 A= 0.1 0.2 0.3 0.4 0.5 0.6 0.8 1.0 1.1 1.3 1.6 2.1 3.0 3.8 4.7 5.6 6.5 K=8 A= 0.1 0.2 0.3 0.4 0.5 0.6 0.8 0.9 1.1 1.3 1.6 1.8 2.5 3.3 4.2 5.1 6.0 k=9 A= 0.1 0.2 0.3 0.4 0.5 0.6 0.8 0.9 1.1 1.3 1.5 1.8 2.1 2.9 3.7 4.6 5.4 K 3 4 5 6 7 8 9 L= 0.0 0.0 0.0 0.0 0.0 0.3 1.3 • Series 200 for thicker doors • 94° opening Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Hinges for min. 18 mm thick doors. 15.5 mm deep cup. 94° opening. Possible drilling distance on the door (K): from 3 to 9 mm. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. Space needed to open the door Projection of the door Projection of the door from the cabinet side at the max. opening. The figures are based on a straight arm hinge, H=0 mm thickness of mounting plate and K value = 3 mm. “C” value With this formula you can obtain the max. thickness of the moulded door that can be opened without touching adjacent carcase sides, doors or walls, whilst bearing in mind the above L•K•T values. The above values are calculated on the assumption that the doors have square edges. They are reduced if the doors have radiussed edges. 22

H= 15 + K - (D) H= 6 + K - (D) H= -2 + K + A H= 10 + K - (D) C2_BAE9 C2_BGE9 C2_BPE9 C2_BDE9 ø35 15.5 Arm 17 Use these formulas to determine the type of hinge arm, the drilling distance “K” and the height of the mounting plate “H” which is necessary to solve each application problem. Use the tables “Drillings and fixings” at page 21 to complete the code number of the desired hinge. Packing • Boxes 300 pcs. • Pallets 7.200 pcs. Logica Packing • Boxes 150 pcs. • Pallets 3.600 pcs. Arm 0 Arm 9 Arm 5 23

T= 16 18 20 22 24 25 26 27 28 K=3 A= 0.0 0.0 0.0 0.0 0.0 0.10 0.40 0.75 1.20 K=4 A= 0.0 0.0 0.0 0.0 0.0 0.15 0.45 0.85 1.35 K=5 A= 0.0 0.0 0.0 0.0 0.0 0.20 0.50 0.95 120° 1.70 K=6 A= 0.0 0.0 0.0 0.0 0.0 0.25 0.60 1.10 120° 1.95 K=7 A= 0.0 0.0 0.0 0.0 0.0 0.30 0.70 1.30 92° 2.30 K=8 A= 0.0 0.0 0.0 0.0 0.0 0.35 0.85 120° 1.70 92° 2.80 K=9 A= 0.0 0.0 0.0 0.0 0.15 0.55 1.20 92° 2.15 A 6 H=0 6 1.5 K=4 28 1.2 K=3 28 A=1.2 K=3 S • Series 200 for thicker doors • 155° opening Technical information Hinges with integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. Hinges for thick doors 16 mm min. Hinge with greater opening angle and reduced operating profile 13.5 mm deep cup. 155° opening. Possible drilling distance on the door (K): from 3 to 8 mm. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. Space needed to open the door “C” value The above values are calculated on the assumption that the doors have square edges. They are reduced if the doors have radiussed edges. With opening stop device to 92° art. S2BM37XG With opening stop device to 120° art. S2AM37XG Spaces with removable components. The door combined with a mounting plate H=0 and a straight arm hinge opens at 90° with lateral door protrusion of 6 mm. 24

H= 15 + K - (D) H= 6 + K - (D) C2_KAE9 C2_KGE9 H= 10 + K - (D) C2_KDE9 C2_KPE9 H= -2 + K + A ø35 13.5 Use these formulas to determine the type of hinge arm, the drilling distance “K” and the height of the mounting plate “H” which is necessary to solve each application problem. To limit the opening of the hinge, see page 69 chapter “Accessories”. Use the tables “Drillings and fixings” at page 21 to complete the code number of the desired hinge. Packing • Boxes 100 pcs. • Pallets 2.400 pcs. Arm 0 Arm 9 Arm 5 25

C2_BZE9 C2_BEE9 C2_BUE9 ø35 15.5 • Series 200 for thicker doors • Complementary hinges Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. For wooden doors with positive angled assembly. Hinges for min. 18 mm thick doors. 15.5 mm deep cup. 94° opening. Possible drilling distance on the door (K): from 3 to 9 mm. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. The solution of assembly problems where doors are mounted at a positive angle requires the verification of drilling distances by a practical trial. Please do not hesitate to consult our technical support department for assistance. Use the tables “Drillings and fixings” at page 21 to complete the code number of the desired hinge. Packing • Boxes 150 pcs. • Pallets 3.600 pcs. Arm 15° Arm 30° Arm 24° 26

C2_BKE9 C2_BVE9 C2_BME9AC C2_BME9 C2_BTE9 Arm 37° Arm 45° Arm 45° Arm 45° Arm 30° 27

H = 0 H = 3 H = 6 C2_BNE9AC * A=1 K=3 ø35 15.5 • Series 200 for thicker doors • Complementary hinges Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Crampon hinges. For cabinet sides with 37x32 mm standard drilling. Hinges for min. 18 mm thick doors. 15.5 mm deep cup. 94° opening. Possible drilling distance on the door (K): from 3 to 9 m. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. Use the tables “Drillings and fixings” at page 21 to complete the code number of the desired hinge. E min: •61 mm for Series 200 mounting plates. •70 mm for Domi snap-on mounting plates. •74 mm for Domi snap-on mounting plates with back cam. Packing • Boxes 150 pcs. • Pallets 3.600 pcs. Heights of mounting plates for every assembly. 28

C2_BNE9 * A=1 K=3 H = 0 H = 9 H = 12 ø35 15.5 Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Crampon hinges. For smaller spaces with 15x32 mm drilling. Hinges for min. 18 mm thick doors. 15.5 mm deep cup. 94° opening. Possible drilling distance on the door (K): from 3 to 9 mm. Compatible with all traditional Series 200 mounting plates, 28x32 mm drilling. NOT COMPATIBLE with Domi snap-on mounting plates. Use the tables “Drillings and fixings” at page 21 to complete the code number of the desired hinge. Packing • Boxes 150 pcs. • Pallets 3.600 pcs. Heights of mounting plates for every assembly. 29

30

• Series 300 31

20.5 37 66 • Series 300 Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Bright nickel plated steel cup and arm. Dimensions of the Ø 35 mm cup. Constant “L” value of 1.3 mm (it does not change during side adjustment). Approx. number of hinges required according to the door dimension and weight. Width of the door Weight of the door (N) Height of the door Adjustments Compensating side adjustment from -1.5 mm to +3 mm. Height adjustment ±1.5 mm by cam. Depth adjustment with Series 300 mounting plates +2.8 mm. Anti-sliding safety stop. Mounting plates Asymmetrical bright nickel plated die-cast Series 300 mounting plates. Positioning with pre-determined stop. N.B. : Use POZIDRIVE No. 2 screwdrivers for all screws. Technical features 32

ø35 15.5 Wood screw Dowel Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: C3_BAE9. Fill this position with the chosen letter or number. 94° opening Drillings and fixings 33

C=22.5 + K + A T= 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 K=3 A= 0.1 0.2 0.3 0.4 0.5 0.7 0.8 1.0 1.6 2.6 3.5 4.5 5.4 6.4 7.4 8.3 9.3 K=4 A= 0.1 0.2 0.3 0.4 0.5 0.7 0.8 1.0 1.2 1.9 2.8 3.8 4.7 5.7 6.6 7.6 8.6 K=5 A= 0.1 0.2 0.3 0.4 0.5 0.7 0.8 1.0 1.2 1.4 2.2 3.1 4.1 5.0 5.9 6.9 7.8 K=6 A= 0.1 0.2 0.3 0.4 0.5 0.6 0.8 1.0 1.2 1.4 1.7 2.6 3.5 4.4 5.3 6.2 7.2 K=7 A= 0.1 0.2 0.3 0.4 0.5 0.6 0.8 1.0 1.1 1.3 1.6 2.1 3.0 3.8 4.7 5.6 6.5 K=8 A= 0.1 0.2 0.3 0.4 0.5 0.6 0.8 0.9 1.1 1.3 1.6 1.8 2.5 3.3 4.2 5.1 6.0 K=9 A= 0.1 0.2 0.3 0.4 0.5 0.6 0.8 0.9 1.1 1.3 1.5 1.8 2.1 2.9 3.7 4.6 5.4 K= 3 4 5 6 7 8 9 L= 0.0 0.0 0.0 0.0 0.0 0.3 1.3 • Series 300 • 94° opening Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Hinges for min. 18 mm thick doors. 15.5 mm deep cup. 94° opening. Possible drilling distance on the door (K): from 3 to 9 mm. Compatible with all traditional Series 300 mounting plates. Space needed to open the door Projection of the door Projection of the door from the cabinet side at the max. opening. The figures are based on a straight arm hinge, H=0 mm thickness of mounting plate and K value = 3 mm. “C” value With this formula you can obtain the max. thickness of the moulded door that can be opened without touching adjacent carcase sides, doors or walls, whilst bearing in mind the above L•K•T values. The above values are calculated on the assumption that the doors have square edges. They are reduced if the doors have radiussed edges. 34

H= 13 + K - (D) C3_BAE9 ø35 15.5 Use these formulas to determine the type of hinge arm, the drilling distance “K” and the height of the mounting plate “H” which is necessary to solve each application problem. Use the tables “Drillings and fixings” at page 33 to complete the code number of the desired hinge. Packing - Boxes 300 pcs. - Pallets 7.200 pcs. Arm 0 35

36

• Series 700 37

20.5 37 66 Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Bright nickel plated steel cup and arm. Dimensions of the Ø 35 mm cup. Constant “L” value of 1.3 mm (it does not change during side adjustment). Approx. number of hinges required according to the door dimension and weight. Width of the door Weight of the door (N) Height of the door Adjustments Compensated side adjustment from -1.5 mm to +4.5 mm. Height adjustment ±2 mm. Depth adjustment with Series 200 mounting plates +2.8 mm. Depth adjustment with Domi snap-on mounting plates from -0.5 mm to +2.8 mm. Anti-sliding safety stop. Mounting plates Symmetrical and asymmetrical bright nickel plated steel or die-cast Series 200 mounting plates. Snap-on assembly on Domi mounting plates. Positioning with pre-determined stop on traditional Series 200 mounting plates. N.B. : Use POZIDRIVE No. 2 screwdrivers for all screws. Technical features 38

ø35 13.5 Logica Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: C7_6AE9. Fill this position with the chosen letter or number. Wood screw Dowel Rapido 110° opening and complementary hinges 155° opening Drillings and fixings 39

C=22.5 + K + A T= 16 17 18 19 20 21 22 23 24 25 26 K=3 A= 0.7 0.9 1.1 1.3 1.6 1.9 2.2 2.6 3.2 4.4 5.7 K=4 A= 0.6 0.8 1.1 1.3 1.6 1.8 2.2 2.5 2.9 3.4 4.7 K=5 A= 0.6 0.8 1.0 1.3 1.5 1.8 2.1 2.4 2.8 3.2 3.7 K=6 A= 0.6 0.8 1.0 1.2 1.5 1.8 2.1 2.4 2.7 3.1 3.6 T= 16 17 18 19 20 21 22 23 24 25 26 K=3 L= 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.2 0.4 0.6 0.9 K=4 L= 0.0 0.0 0.0 0.3 0.5 0.7 0.9 1.1 1.4 1.6 1.8 K=5 L= 0.6 0.8 1.0 1.2 1.5 1.7 1.9 2.1 2.4 2.6 2.8 K=6 L= 1.5 1.8 2.0 2.2 2.4 2.7 2.9 3.1 3.3 3.6 3.8 • Series 700 • 110° opening Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Hinges for min. 16 mm thick doors. 13.5 mm deep cup. 110° opening. Possible drilling distance on the door (K): from 3 to 6 mm. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. Space needed to open the door Projection of the door Projection of the door from the cabinet side at the max. opening. The figures are based on a straight arm hinge, H=0 mm thickness of mounting plate and K value = 3 mm. “C” value With this formula you can obtain the max. thickness of the moulded door that can be opened without touching adjacent carcase sides, doors or walls, whilst bearing in mind the above L•K•T values. The above values are calculated on the assumption that the doors have square edges. They are reduced if the doors have radiussed edges. 40

H= 15 + K - (D) H= 6 + K - (D) H= 10 + K - (D) C7_6AE9 C7_6GE9 C7_6DE9 H= -2 + K + A C7_6PE9 ø35 13.5 Use these formulas to determine the type of hinge arm, the drilling distance “K” and the height of the mounting plate “H” which is necessary to solve each application problem. Use the tables “Drillings and fixings” at page 39 to complete the code number of the desired hinge. Packing • Boxes 300 pcs. • Pallets 7.200 pcs. Arm 0 Arm 9 Arm 5 Arm 17 41

A T= 16 18 20 22 24 25 26 27 28 K=3 A= 0.0 0.0 0.0 0.0 0.0 0.10 0.40 0.75 1.20 K=4 A= 0.0 0.0 0.0 0.0 0.0 0.15 0.45 0.85 1.35 K=5 A= 0.0 0.0 0.0 0.0 0.0 0.20 0.50 0.95 120° 1.70 K=6 A= 0.0 0.0 0.0 0.0 0.0 0.25 0.60 1.10 120° 1.95 K=7 A= 0.0 0.0 0.0 0.0 0.0 0.30 0.70 1.30 92° 2.30 K=8 A= 0.0 0.0 0.0 0.0 0.0 0.35 0.85 120° 1.70 92° 2.80 K=9 A= 0.0 0.0 0.0 0.0 0.15 0.55 1.20 92° 2.15 6 H=0 6 1.5 K=4 28 1.2 K=3 28 A=1.2 K=3 S • Series 700 • 155° opening Technical information Hinges with integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. Hinges for thick doors 16 mm min. Hinge with greater opening angle and reduced operating profile. 13.5 mm deep cup. 155° opening. Possible drilling distance on the door (K): from 3 to 9 mm. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. Space needed to open the door The above values are calculated on the assumption that the doors have square edges. They are reduced if the doors have radiussed edges. With opening stop device a 92° art. S2BM37XG With opening stop device a 120° art. S2AM37XG “C” value Spaces with removable components. The door combined with a mounting plate H=0 and a straight arm hinge opens at 90° with lateral door protrusion of 2 mm. 42

C2_KAE9 C2_KGE9 C2_KDE9 C2_KPE9 ø35 13.5 H= 15 + K - (D) H= 6 + K - (D) H= 10 + K - (D) H= -2 + K + A Use these formulas to determine the type of hinge arm, the drilling distance “K” and the height of the mounting plate “H” which is necessary to solve each application problem. To limit the opening of the hinge, see page 69 chapter “Accessories”. Use the tables “Drillings and fixings” at page 39 to complete the code number of the desired hinge. Packing • Boxes 100 pcs. • Pallets 2.400 pcs. Arm 0 Arm 9 Arm 5 Arm 17 43

C7_6ZE9 C7_6EE9 C7_6UE9 ø35 13.5 • Series 700 • Complementary hinges Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. For wooden doors with positive angled assembly. Hinges for min. 16 mm thick doors. 13.5 mm deep cup. 110° opening. Possible drilling distance on the door (K): from 3 to 6 mm. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. The solution of assembly problems where doors are mounted at a positive angle requires the verification of drilling distances by a practical trial. Please do not hesitate to consult our technical support department for assistance. Use the tables “Drillings and fixings” at page 39 to complete the code number of the desired hinge. Packing • Boxes 150 pcs. • Pallets 3.600 pcs. Arm 15° Arm 30° Arm 24° 44

C7_6KE9 C7_6VE9 C7_6ME9AC C7_6ME9 C7_6TE9 Arm 37° Arm 45° Arm 45° Arm 45° Arm 30° 45

C7_6WE9 ø35 13.5 • Complementary hinges The solution of assembly problems where doors are mounted at a negative angle requires the verification of drilling distances by a practical trial. Please do not hesitate to consult our technical support department for assistance. Use the tables “Drillings and fixings” at page 39 to complete the code number of the desired hinge. Packing • Boxes 150 pcs. • Pallets 3.600 pcs. Arm -30° Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. For wooden doors with negative angled assembly. Hinges for min. 16 mm thick doors. 13.5 mm deep cup. 110° opening. Possible drilling distance on the door (K): from 3 to 6 mm. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. 46

H = 0 H = 3 H = 6 C7_6NE9AC * A=1 K=3 ø35 13.5 Use the tables “Drillings and fixings” at page 39 to complete the code number of the desired hinge. Packing • Boxes 150 pcs. • Pallets 3.600 pcs. Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Crampon hinges. For cabinet sides with 37x32 mm standard drilling. Hinges for min. 16 mm thick doors. 13.5 mm deep cup. 110° opening. Possible drilling distance on the door (K): from 3 to 6 mm. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. Heights of mounting plates for every assembly. E min: •61 mm for Series 200 mounting plates. •70 mm for Domi snap-on mounting plates. •74 mm for Domi snap-on mounting plates with back cam. 47

H = 0 H = 3 H = 6 C7_6NE9AM ø35 13.5 • Series 700 • Complementary hinges Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Long crampon hinges. Hinges for min. 16 mm thick doors. 13.5 mm deep cup. 110° opening. Possible drilling distance on the door (K): from 3 to 6 m. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. Use the tables “Drillings and fixings” at page 37 to complete the code number of the desired hinge. Packing • Boxes 150 pcs. • Pallets 3.600 pcs. Heights of mounting plates for every assembly. E min: •61 mm for Series 200 mounting plates. •70 mm for Domi snap-on mounting plates. •74 mm for Domi snap-on mounting plates with back cam. 48

C7_6NE9 * A=1 K=3 H = 0 H = 9 H = 12 ø35 13.5 Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Crampon hinges. For smaller spaces with 15x32 mm drilling. Hinges for min. 16 mm thick doors. 13.5 mm deep cup. 110° opening. Possible drilling distance on the door (K): from 3 to 6 mm. Compatible with all traditional Series 200 mounting plates, 28x32 mm drilling. NOT COMPATIBLE with Domi snap-on mounting plates. Use the tables “Drillings and fixings” at page 37 to complete the code number of the desired hinge. Packing • Boxes 150 pcs. • Pallets 3.600 pcs. Heights of mounting plates for every assembly. 49

50

• For metal profiles 51

C1Z6AE9 C1Z6GE9 C1Z6PE9 C1Z6DE9 • For metal profiles Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Hinges specially developed for use with metal profiles. 105° opening. We recommend the use of countersunk flat head self tapping screws ø 2.9x6.5 UNI 6955 DIN 7982 to fix C1Z6 hinges. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. Arm 0 Arm 9 Arm 17 Arm 5 Packing • Boxes 150 pcs. • Pallets 3.600 pcs. 52

C1Z6EE9 C1Z6ME9 Arm 30° Packing • Boxes 150 pcs. • Pallets 3.600 pcs. Arm 45° Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. For doors with positive angled assembly. Hinges specially developed for use with metal profiles. 105° opening. We recommend the use of countersunk flat head self tapping screws ø 2.9x6.5 UNI 6955 DIN 7982 to fix C1Z6 hinges. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. Complementary hinges 53

C1Z6NE9AC C1Z6NE9 • For metal profiles • Complementary hinges Packing • Boxes 150 pcs. •Pallets 3.600 pcs. Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Crampon hinges. For cabinet sides with 37x32 mm standard drilling. Hinges specially developed for use with metal profiles. 105° opening. We recommend the use of countersunk flat head self tapping screws ø 2.9x6.5 UNI 6955 DIN 7982 to fix C1Z6 hinges. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Crampon hinges. For smaller spaces with 15x32 mm drilling. Hinges specially developed for use with metal profiles. 105° opening. We recommend the use of countersunk flat head self tapping screws ø 2.9 x 6.5 UNI 6955 DIN 7982 to fix C1Z6 hinges. Compatible with all traditional Series 200 mounting plates, drilling 28x32 mm. NOT COMPATIBLE with Domi snap-on mounting plates. Packing • Boxes 150 pcs. • Pallets 3.600 pcs. E min: •61 mm for Series 200 mounting plates. •70 mm for Domi snap-on mounting plates. •74 mm for Domi snap-on mounting plates with back cam. 54

D1Z6HSK ø 2.3 Drilling of the metal profile Countersunk flat head self tapping screws ø 2.9x6.5 UNI 6955 - DIN 7982 Fancy cover for hinge (should be ordered separately) 55

56

• Series 800 57

Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Bright nickel plated steel cup and arm. Dimensions of the Ø 35 mm cup. Approx. number of hinges required according to the door dimension and weight. Width of the door Weight of the door (N) Height of the door Adjustments Side adjustment from -1.5 mm to +4.5 mm. Height adjustment ±2 mm. Depth adjustment from -1.5 mm to +3 mm. Mounting plates Symmetrical and asymmetrical bright nickel plated steel Series 200 mounting plates. NOT COMPATIBLE with Series 200 mounting plates with negative height. N.B. : Use POZIDRIVE No. 2 screwdrivers for all screws. • Series 800 Technical features 58

ø35 12 Wood screw Dowel 105° opening Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: C8_6CE9. Fill this position with the chosen letter or number. Rapido Drillings and fixings 59

T= 15 16 17 18 19 20 K=3 A= 1.0 1.0 1.2 1.4 1.6 1.9 K=4 A= 0.9 1.0 1.2 1.3 1.5 1.8 K=5 A= 0.9 1.0 1.1 1.2 1.5 1.8 K=6 A= 0.9 1.0 1.1 1.2 1.4 1.7 T= 15 16 17 18 19 20 K=3 L= 0.0 0.0 0.0 0.0 0.1 0.3 K=4 L= 0.4 0.6 0.7 0.9 1.1 1.2 K=5 L= 1.0 1.0 1.2 1.8 2.0 2.0 K=6 L= 1.6 1.8 2.0 2.1 2.3 2.5 C = 20.5 + K + A • Series 800 • 105° opening Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Hinges for doors of small weight and thickness. 12 mm deep cup. 105° opening. Possible drilling distance on the door (K): from 3 to 6 mm. Compatible with all traditional steel Series 200 mounting plates. Space needed to open the door Projection of the door Projection of the door from the cabinet side at the max. opening. The figures are based on a straight arm hinge, H=0 mm thickness of mounting plate and K value = 3 mm. “C” value With this formula you can obtain the max. thickness of the moulded door that can be opened without touching adjacent carcase sides, doors or walls, whilst bearing in mind the above L•K•T values. The above values are calculated on the assumption that the doors have square edges. They are reduced if the doors have radiussed edges. 60

H= 15 + K - (D) H= 6 + K - (D) H= -2 + K + A H= 10 + K - (D) C8_6CE9 C8_6LE9 C8_6JE9 C8_6SE9 ø35 12 Use these formulas to determine the type of hinge arm, the drilling distance “K” and the height of the mounting plate “H” which is necessary to solve each application problem. Use the tables “Drillings and fixings” at page 59 to complete the code number of the desired hinge. Packing • Boxes 300 pcs. • Pallets 7.200 pcs. Arm 0 Arm 17 Arm 5 Arm 9 61

62

• Series 900 63

• Series 900 Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Bright nickel plated steel cup and arm. Dimensions of the Ø 35 mm cup. Approx. number of hinges required according to the door dimension and weight. Width of the door Weight of the door (N) Height of the door Adjustments Side adjustment from -1.5 mm to +4 mm. Height adjustment ±2 mm. Depth adjustment +2.5 mm. Mounting plates Symmetrical and asymmetrical bright nickel plated steel or die-cast Series 200 mounting plates. NOT COMPATIBLE with Series 200 mounting plates with negative height. N.B. : Use POZIDRIVE No. 2 screwdrivers for all screws. Technical features 64

ø35 12 105° opening Wood screw Dowel Fill this position with the chosen letter or number. Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: C9_6CE9. Rapido Drillings and fixings 65

T= 15 16 17 18 19 20 K=3 A= 1.0 1.0 1.2 1.4 1.6 1.9 K=4 A= 0.9 1.0 1.2 1.3 1.5 1.8 K=5 A= 0.9 1.0 1.1 1.2 1.5 1.8 K=6 A= 0.9 1.0 1.1 1.2 1.4 1.7 T= 15 16 17 18 19 20 K=3 L= 0.0 0.0 0.0 0.0 0.1 0.3 K=4 L= 0.4 0.6 0.7 0.9 1.1 1.2 K=5 L= 1.0 1.0 1.2 1.8 2.0 2.0 K=6 L= 1.6 1.8 2.0 2.1 2.3 2.5 C=20.5 + K + A • Series 900 • 105° opening Technical information Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup. The decelerating effect is adjusted by using a simple switch. Hinges for doors of small weight and thickness. 12 mm deep cup. 105° opening. Possible drilling distance on the door (K): from 3 to 6 mm. Compatible with all traditional Series 200 mounting plates. NOT COMPATIBLE with Domi snap-on mounting plates. Space needed to open the door Projection of the door Projection of the door from the cabinet side at the max. opening. The figures are based on a straight arm hinge, H=0 mm thickness of mounting plate and K value = 3 mm. “C” value With this formula you can obtain the max. thickness of the moulded door that can be opened without touching adjacent carcase sides, doors or walls, whilst bearing in mind the above L•K•T values. The above values are calculated on the assumption that the doors have square edges. They are reduced if the doors have radiussed edges. 66

H= 15 + K - (D) H= 6 + K - (D) H= -2 + K + A H= 10 + K - (D) C9_6CE9 C9_6LE9 C9_6JE9 C9_6SE9 ø35 12 Use these formulas to determine the type of hinge arm, the drilling distance “K” and the height of the mounting plate “H” which is necessary to solve each application problem. Use the tables “Drillings and fixings” at page 65 to complete the code number of the desired hinge. Packing • Boxes 300 pcs. • Pallets 7.200 pcs. Arm 0 Arm 9 Arm 17 Arm 5 67

68

Accessories 69

S2BX83H9 S8XX83H9 S2MX83H9 S8CX83H9 S9CX83H9 S9XX83H9 Accessories Symmetrical steel screw cover cap, it can be personalised on request. For Series 100, 200 and 700 hinges. Symmetrical steel screw cover cap, it can be personalised on request. For Series 800 hinges. Symmetrical steel screw cover cap with embossed logo. For Series 100, 200 and 700 hinges. Symmetrical steel screw cover cap with embossed logo. For Series 800 hinges. Symmetrical steel screw cover cap with embossed logo. For Series 900 hinges and complementary hinges Series 200 and 700. Steel symmetrical screw cover cap, it can be personalised on request. For Series 900 hinges and complementary hinges Series 200 and 700. Screw cover caps. 70

S2CX85H9 S2XX85H9 D_A_AC_SN D1Z6HSK S2XF86 S2XX86 Steel flange cover cap with embossed logo. For all Series 100, 200, 300, 700, 800 and 900. Steel flange cover cap, it can be personalised on request. For all Series 100, 200, 300, 700, 800 and 900. Flange cover caps. Gauge to check the diameter and the depth of the drilling. D1A6AC3SN = 12 mm D2ABACGSN = 15.5 mm D7A6ACYSN = 13.5 mm Spacers, gauge and fancy cover for Silentia hinges. Fancy cover for metal profiles hinges. Spacer to reduce the drilling depth for 155° hinges. S2XF86BT = 0.6 mm S2XF86AT = 1.2 mm S2XF86KT = 1.8 mm Spacer to reduce the drilling depth for 94°, 105° and 110° hinges. S2XX86BT = 0.6 mm S2XX86AT = 1.2 mm S2XX86KT = 1.8 mm 71

S2A637XF S2AF37X3 S2BF37XY S2BM37XG S2AM37XG S1E637XY Stop devices. Accessories For all hinges for thicker doors, it limits opening at about 86°. For 94° hinges, it limits opening at about 86°. For 155° hinges, it limits opening at 135°. For 155° hinges, it limits opening at about 135°. For 155° hinges, it limits opening at 130°. For 155° hinges, it limits opening at about 130°. For 155° hinges, it limits opening at 92°. For 155° hinges, it limits opening at about 92°. For 155° hinges, it limits opening at 120°. For 155° hinges, it limits opening at about 120°. For all Series 100 and 700 hinges,it limits opening at about 86°. For 105° and 155° hinges, it limits opening at about 86°. 72

Notes 73

Notes 74

Notes 75

We reserve the right to change technical specifications without notice. Digital contents: • Technical pamphlet in Pdf format • Video D0CASA007ENG Ed. 13 - 07/2021 ARTURO SALICE S.p.A. VIA PROVINCIALE NOVEDRATESE, 10 22060 NOVEDRATE (COMO) ITALIA TEL. 031 790424 - FAX 031 791508 info.salice@salice.com - www.salice.com DEUTSCHE SALICE GMBH RUDOLF DIESEL STR. 10 POSTFACH 1154 74382 NECKARWESTHEIM TEL. 07233 9807-0 FAX. 07233 9807-16 info.salice@deutschesalice.de www.salice.com DEUTSCHE SALICE GMBH VERKAUFSBÜRO NORD RINGSTRASSE 36/A30 CENTER 32584 LÖHNE TEL. 05731 15608-0 FAX. 05731 15608-10 vknord@deutschesalice.de www.salice.com SALICE UK LTD. KINGFISHER WAY HINCHINGBROOKE BUSINESS PARK HUNTINGDON CAMBS PE 29 6FN TEL. 01480 413831 FAX. 01480 451489 info.salice@saliceuk.co.uk www.salice.com SALICE FRANCE S.A.R.L. ROUTE DE GOA ZAC LES 3 MOULINS 06600 ANTIBES TEL. 0493 330069 FAX. 0493 330141 info.salice@salicefrance.com www.salice.com SALICE ESPAÑA, S.L.U. CALLE COPÉRNICO, 11 POLÍGONO INDUSTRIAL COLL DE LA MANYA 08403 GRANOLLERS (BARCELONA) TEL. 938 45 88 61 FAX 938 49 11 97 info.salice@saliceespana.es www.salice.com SALICE PORTUGAL UNIP. Lda VIA ROTA DOS MÓVEIS l nº399 4585-325 GANDRA-PRD (DIST. PORTO) PORTUGAL TEL. 0351 910077406 saliceportugal@salice.com www.salice.com SALICE CHINA (SHANGHAI) CO. LTD. 1st FLOOR, B1 BLDG 928 MINGZHU ROAD XUJING, QINGPU DISTRICT SHANGHAI 201702 - CHINA TEL. 021 3988 9880 FAX. 021 3988 9882 info.salice@salicechina.com www.salicechina.com SALICE INDIA PVT. LTD. 1001 & 1002, 10TH FLOOR, CENTRUM, PLOT NO. C-3, OPP. WAGLE PRABHAG SAMITI OFFICE, MIDC AREA, WAGLE INDUSTRIAL ESTATE, THANE - 400604, MAHARASHTRA TEL. 022 20812050 info@saliceindia.com www.salice.com SALICE CANADA INC. 3500 RIDGEWAY DRIVE, UNIT#1 MISSISSAUGA, ONTARIO, L5L 0B4 TEL. 905 8208787 FAX. 905 8207226 info.salice@salicecanada.com www.salicecanada.com SALICE AMERICA INC. 2123 CROWN CENTRE DRIVE CHARLOTTE NC. 28227 TEL. 704 8417810 FAX. 704 8417808 info.salice@saliceamerica.com www.saliceamerica.com

RkJQdWJsaXNoZXIy NzM3NTE=